BoutCheetah

Other => GFX => Topic started by: qwerasdf2453 on January 17, 2011, 03:20:52 AM

Title: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 03:20:52 AM
I still thinks its worth more THEN 10MIL!

(http://i56.tinypic.com/vwsn55.jpg)


[IMG]http://i56.tinypic.com/vwsn55.jpg[/IMG]



BTW MUNCAY IF U READING THIS PLS TELL ME IF I CAN JOIN SILENCE BAK T.T I KNEW I MADE A MISTAKE PLS?
Title: Re: Finite's sig PPL U CAN CNC!
Post by: zomniethe4 on January 17, 2011, 04:07:06 AM
Sigs should be free, with maybe some donations.
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Allie on January 17, 2011, 04:17:48 AM
It's worth 16 gigas tops.
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Xrow on January 17, 2011, 04:27:16 AM
Quote from: Allie on January 17, 2011, 04:17:48 AM
It's worth 16 gigas tops.

I offer 17 gigas.
Suck on THAT Allie >;O
Title: Re: Finite's sig PPL U CAN CNC!
Post by: bangaer2 on January 17, 2011, 04:28:01 AM
Quote from: Allie on January 17, 2011, 04:17:48 AM
It's worth 16 gigas tops.
Agreed

@Xrow you are being scammed =/
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Allie on January 17, 2011, 04:29:19 AM
Quote from: Xrow on January 17, 2011, 04:27:16 AM
I offer 17 gigas.
Suck on THAT Allie >;O

I said it's worth 16 gigas at most, not that some idiot wouldn't offer more.
Suck on THAT Xrow >;O
Title: Re: Finite's sig PPL U CAN CNC!
Post by: bangaer2 on January 17, 2011, 04:30:39 AM
lol Xrow scam urselfz
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Meta on January 17, 2011, 04:37:08 AM
The sig isn't worth anything...
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Xrow on January 17, 2011, 04:44:43 AM
Quote from: Allie on January 17, 2011, 04:17:48 AM
It's worth 16 gigas tops.

TRUTH IS NOT RELATIVE.
THEREFORE TRUTH IS ABSOLUTE.
THEREFORE THIS IS ABSOLUTE.
BUT I OFFERED 17, THUS MAKING A NEW TRUTH.
THUS YOUR TRUTH IS NOW WRONG.
AND MIND IS RIGHT.

THUS YOU SUCK.

So suck on THAT Allie >;O
Title: Re: Finite's sig PPL U CAN CNC!
Post by: bangaer2 on January 17, 2011, 04:51:14 AM
Quote from: Xrow on January 17, 2011, 04:44:43 AM
TRUTH IS NOT RELATIVE.
THEREFORE TRUTH IS ABSOLUTE.
THEREFORE THIS IS ABSOLUTE.
BUT I OFFERED 17, THUS MAKING A NEW TRUTH.
THUS YOUR TRUTH IS NOW WRONG.
AND MIND IS RIGHT.

THUS YOU SUCK.

So suck on THAT Allie >;O
It still doesnt chage the rarity of that sig =/
Title: Re: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 05:19:24 AM
... wdf ?
Title: Re: Finite's sig PPL U CAN CNC!
Post by: hawk5005 on January 17, 2011, 05:37:11 AM
Too small , text is wrong ( position , format ) , lighting is very weird . :-X
Title: Re: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 06:42:24 AM
for info i used a tut 0.0
Title: Re: Finite's sig PPL U CAN CNC!
Post by: hawk5005 on January 17, 2011, 06:47:36 AM
Quote from: qwerasdf2453 on January 17, 2011, 06:42:24 AM
for info i used a tut 0.0
May I see it?
Title: Re: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 06:58:00 AM
why...? btw its in sigtutorials.com the hot smudge something i think
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Meta on January 17, 2011, 07:08:57 AM
If you followed the "Smudge Video Tutorial" then you sir is a failure.
Title: Re: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 07:13:44 AM
uhh um ok u can barely see the smudge i know but i knew the render was big btw
Title: Re: Finite's sig PPL U CAN CNC!
Post by: -PeaceLover- on January 17, 2011, 12:50:27 PM
hey guy its good but as thay say sig should be free make them for fun :)
Title: Re: Finite's sig PPL U CAN CNC!
Post by: qwerasdf2453 on January 17, 2011, 02:22:40 PM
Quote from: -PeaceLover- on January 17, 2011, 12:50:27 PM
hey guy its good but as thay say sig should be free make them for fun :)

i know
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Allie on January 18, 2011, 01:28:18 AM
Quote from: Xrow on January 17, 2011, 04:44:43 AM
TRUTH IS NOT RELATIVE.    <--- I see no evidence for this, therefore your proof is denied
THEREFORE TRUTH IS ABSOLUTE.
THEREFORE THIS IS ABSOLUTE.
BUT I OFFERED 17, THUS MAKING A NEW TRUTH.
THUS YOUR TRUTH IS NOW WRONG.
AND MIND IS RIGHT.

THUS YOU SUCK.

So suck on THAT Xrow >;O
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Xrow on January 18, 2011, 02:10:45 AM
It absolutely true for all people in all places that Allie sees no evidence for this.
Try again bucko  ;)


http://boutcheetah.zylongaming.com/index.php?topic=7312.0
Title: Re: Finite's sig PPL U CAN CNC!
Post by: Finite on January 20, 2011, 02:55:59 AM
frik did i get scammed?